BMW S 1000 RR Dual Floating disk brake menjadi andalan

Motor kelas Supersport milik pabrikan BMW menggunakan mesin 4 langkah berpendingin air dengan 4 silinder disusun sejajar, 4 katup per silindernya membantu mengatur keluar masuknya udara dan bahan bakar.

Seperti motor berteknologi pada umumnya, BMW S 1000 RR pun telah menerapkan teknologi Ride by Wire untuk mengontrol Electronic Fuel Injection.

Kadar emisi yang keluar di kontrol Closed-loop 3-way catalytic converters, EU-3 norm with electronically controlled interference pipe.

BMW S 1000 RR
www.bmwmotorcycles.com
Dengan kemampuan berlarinya yang bisa lebih dari 200km/h maka dibutuhkan sistem pengereman yang handal, oleh karenanya Dual floating disc brakes, dengan 4-piston fixed calipers, berdiameter 320 mm dipercaya untuk menjaga roda depan dan Single disc brake, berdiameter 220 mm, single piston floating caliper digunakan untuk menahan roda belakang yang pastinya sudah di lengkapi dengan ABS.

Spesifikasi Lengkap BMW S 1000 RR

Mesin

Type :
Liquid-cooled 4-stroke in-line 4-cylinder engine, four valves per cylinder, double overhead camshafts, wet sump lubrication.

Bore x stroke :
80 mm x 49.7 mm

Capacity :
999 cc

Rated output :
199 hp (146 kW) at 13,500 rpm

Max. torque :
83 lb-ft (113 Nm) at 10,500 rpm

Compression ratio :
13.0 : 1

Mixture control / engine management :
Electronic fuel injection with ride-by-wire throttle system and knock sensor

Emission control :
Closed-loop 3-way catalytic converters, EU-3 norm with electronically controlled interference pipe

Performance / fuel consumption

Maximum speed :
Over 125 mph

Fuel consumption per 100 km at constant 90 km/h :
41 mpg at a constant 55 mph (5.7 l)

Fuel type :
Premium Unleaded

Electrical system

Alternator :
Three-phase 350 W generator

Battery :
12 V / 7 Ah, maintenance-free

Power transmission

Clutch :
Multi-plate wet slipper clutch, mechanically operated

Gearbox :
Constant-mesh 6-speed gearbox with straight cut gears

Drive :
Chain 2.647:1

Chassis / brakes

Frame :
Aluminum bridge-type frame with load-bearing engine

Front wheel location / suspension :
Upside-down telescopic fork, Ø 46 mm, compression and rebound stage adjustable

Rear wheel location / suspension :
Aluminum 2-sided swing arm, compression and rebound damping adjustable

Suspension travel front / rear :
4.7" / 4.7" (120 mm / 120 mm)

Wheelbase :
56.6" (1,438 mm)

Castor :
3.9" (96.5 mm)

Steering head angle :
66.5°

Wheels :
Cast aluminum wheels

Rim, front :
3.50 x 17"

Rim, rear :
6.00 x 17"

Tyres, front :
120/70 ZR 17

Tyres, rear :
190/55 ZR 17

Brake, front :
Dual floating disc brakes, 4-piston fixed calipers, diameter 320 mm

Brake, rear :
Single disc brake, diameter 220 mm, single piston floating caliper

ABS :
BMW Motorrad Race ABS (part-integral, can be switched off)

Dimensions / weights

Length
80.8" (2,050 mm)

Width (incl. mirrors) :
32.5" (826 mm)

Height (excl. mirrors) :
44.9" (1,140 mm)

Seat height, unladen weight :
32.1" (815 mm) Standard; comfort seat 33.5" (850 mm) (available as accessories, see an authorized BMW Motorrad dealer)

Inner leg curve, unladen weight :
71.1" (1,805 mm) Standard; comfort seat 73.4" (1,865 mm) (available as accessories, see an authorized BMW Motorrad dealer)

Permitted total weight :
895 lbs (407 kg)

Payload (with standard equipment) :
447 lbs (203 kg)

Usable tank volume :
4.6 gal (17.5 l)

Reserve :
Approx. 1 gal (4.0 l)